Syntax
Hexadecimal 0xFE 0x33 [adr]
Decimal 254 51 [adr]
ASCII 254 “3” [adr]
Parameters
Parameter Length Description
adr 1 The new I2C write address (0x00 -
0xFF).
Description This command sets the I2C write address of the module between 0x00
and 0xFF. The I2C write address must be an even number and the read
address is automatically set to one higher. For example if the I2C write
address is set to 0x50, then the read address is 0x51.
NOTE
The change in address is immediate.
Remembered Always
Default 0x50
4.5 Changing the Baud Rate
Syntax
Hexadecimal 0xFE 0x39 [speed]
Decimal 254 57 [speed]
ASCII 254 “9” [speed]
Parameters
Parameter Length Description
speed 1 Hex value corresponding to a baud
rate.
Matrix Orbital GLK12232-25-SM
17